Pure Energy Stream Hardware Solutions

Why Pure Energy Stream

Pure Energy Stream’s mission is to cut costs and cut emissions while transforming facilities into efficient, resilient, and self-sustaining assets. Our Energy Conditioning Units are more than an efficiency add-on, they are a strategic lever for:

• Lowering operating expenses
• Protecting and extending critical assets
• Supporting ESG, LEED, and net-zero goals
• Leveraging federal and state tax incentives that reward verified energy efficiency improvements
• Enabling digital asset and carbon-credit monetization from verified energy optimization

EcoMAXIM™

The Complete Energy Management Solution

EcoMAXIM™ is a facility-wide energy management system for Megawatt consumers that goes beyond traditional power conditioning to actively optimize, balance, and recycle electricity across your entire site. It is a trade secret technology, validated through testing at LADWP and LACI’s Advanced Prototyping Center at the La Kretz Innovation Campus and by the US Green Building Council – California on energy savings that can contribute approximately 4 – 18 LEED points. It reduces real kilowatt demand, improves power quality, and extends the life of your equipment, all while generating measurable, zero-emissions energy from power that would otherwise be wasted.

Installed in parallel at the Main Distribution Panel, EcoMAXIM™ captures energy lost on the neutral and to ground, conditions it, and routes it back into the building as usable electricity. This closed-loop energy recycling lowers utility costs, reduces demand charges, and supports resilient, high-performance operations without disrupting existing systems or workflows.

Proven Benefits for Facilities

• 8–12% energy cost reduction through real reductions in utility power demand (kW) and kVA, and harmonic losses, for immediate, measurable savings with ROI’s less than 18 months.
• Captures, conditions, and recycles wasted kVAR and neutral/ground losses, turning otherwise lost energy into on-site, zero-emissions power.
• Provides whole-facility surge, spike, and harmonics protection, helping electrical systems and equipment run cooler, more reliably, and with fewer failures.
• Extends the service life of motors, drives, and sensitive electronics by lowering electrical heat, harmonics, and current draw.
• Delivers continuous, real-time monitoring and reporting through a secure command center, supporting ESG reporting, compliance, and stakeholder transparency.
• Improving power factor: Optimizing the ratio of real to apparent power so systems operate closer to unity, or near-100% efficiency.

ESG, LEED, and Net-Zero Ready

Energy Conditioning Units (EC Units) and EcoMAXIM™ are delivered by a USGBC‑CA Net Zero Accelerator alumni company, recognized for advancing high-impact net-zero building technologies. Projects incorporating EC Units and EcoMAXIM can qualify for up to 18 LEED Certification points, supporting Energy & Atmosphere optimization, demand management, and advanced metering and verification pathways

By reducing grid-supplied consumption, recycling neutral and ground losses as zero-emissions energy, and extending equipment lifespans, EC Units directly advance decarbonization, LEED, and broader net-zero strategies. It’s a natural fit for owners, operators, and portfolios facing carbon targets, climate disclosure requirements, and sustainability reporting obligations.

Core Technologies — How EcoMAXIM™ Works

• Reducing real power demand (kW): Lowering circuit amperage and cutting heat losses in conductors and equipment.
• Enhancing power factor by optimizing the ratio of real to apparent power, reducing reactive power (kVAR) and circuit impedance without inducing RLC resonance—allowing systems to operate closer to unity with lower kVA demand, current draw, and overall kW losses.
• Engineered arrays of high-capacity MOVs and capacitor/reactor banks to filter harmful harmonics (3rd, 5th, 7th orders), lowering heat and electrical noise.
• Advanced voltage stabilization and dynamic phase balancing under all load conditions, ensuring consistent phase-to-phase voltage, reduced harmonic distortion, and cooler, more reliable motor and equipment performance.
• Integrated real-time monitoring and analytics to verify performance, quantify savings, and support ESG and compliance reporting.
• Filtering harmonics: Using 60 Hz band-pass filtration to “choke” power to the fundamental frequency, reducing damaging harmonic distortion that causes overheating, nuisance trips, and non-power current the utility still bills as kWh.

Proudly Made in the USA

EcoMAXIM™ is proudly made in the USA, with systems engineered and assembled to meet rigorous performance, reliability, and safety standards. You gain a domestically built, future-ready energy management platform that supports local manufacturing, supply chain resilience, and long-term serviceability.

EC Units™ Advanced Energy Conditioning for Smarter Facilities

The EC Unit™ (Energy Conditioning Unit) is a patented, modular power quality and energy optimization system that reduces real energy demand, improves equipment performance, and extends the life of your electrical infrastructure. Pure Energy Stream delivers a proven, hardware-based solution that treats energy at the source, rather than simply monitoring or redirecting it.

Installed in parallel at the main electrical distribution, EC Units™ lower amperage, correct power factor, filter harmful harmonics, and provide whole-facility surge and spike protection, all without permits, special licensing, or operational downtime. Typical projects see 8–12% energy cost savings, with additional upside from reduced maintenance and extended asset life

Proven Benefits for Facilities

• 8–12% energy cost reduction through real reductions in kW, kVA, and harmonic losses, not just behavioral or software-driven savings.
• Lower operating and maintenance costs by reducing copper losses (heat), helping motors, transformers, elevators, and electronics run cooler and last longer.
• Spike and surge protection built into every unit, helping safeguard critical equipment and, in extreme events, sacrificing the unit to protect the facility.
• Installation is completed in parallel with operations, with only brief, scheduled downtime and minimal impact on day‑to‑day activities. Over-the-counter or express permits may be required.
• Sustainability impact via reduced greenhouse gas emissions, lower fuel and water use tied to power generation, and support for ESG and carbon reduction goals.
• Tax and carbon incentives enable projects to pursue retrofitting tax benefits and carbon credit revenues tied to measured, verified energy savings.
• Made in the USA

How EC Units™ Work

EC Units™ enhance overall power quality and system efficiency by:

• Reducing real power demand (kW): Lowering circuit amperage and cutting heat losses in conductors and equipment.
• Improving power factor: Optimizing the ratio of real to apparent power so systems operate closer to unity, or near-100% efficiency.
• Lowering reactive power (kVAR): Reducing unnecessary current and circuit impedance without creating RLC resonance, which in turn lowers kVA, current, and kW losses.
• Filtering harmonics: Using 60 Hz band-pass filtration to “choke” power to the fundamental frequency, reducing damaging harmonic distortion that causes overheating, nuisance trips, and non-power current the utility still bills as kWh.
• Stabilizing voltage across phases: Helping motors and other loads run cooler and more reliably, with fewer trips and voltage-related issues.
• Recycling spikes and surges as usable power: Capturing electrical noise, spikes, and surges, attenuating them, and returning that energy to the system instead of wasting it as destructive transients.

ESG, LEED, and Net-Zero Alignment

EC Unit™ projects support meaningful reductions in electricity consumption, greenhouse gas emissions, and associated fuel and water use. For owners and operators working toward carbon neutrality, EC Units™ offer a hardware-based pathway to measurable, reportable impact.

Like EcoMAXIM, EC Units™ can support projects in qualifying for LEED points related to energy performance, demand reduction, and power quality, and they integrate naturally with your broader strategy for tax benefits, Title 45 rebates, and carbon credit accrual.

Unlock measurable savings and sustainability gains

Transform wasted energy into profit with EcoMAXIM™ and EC Units™. Partner with Pure Energy Stream to cut costs, earn incentives, and accelerate your path to efficient, resilient, and net-zero operations.